ISO Ingénierie
Cooling towers of a nuclear power station
Atom icon representing nuclear control & command

Nuclear control & command

Speak to an expert

For over 20 years, ISO Ingénierie has been assisting the major players of the nuclear sector (EDF, CEA, DCNS, ITER, ILL, and others) throughout the entire lifecycle and safety demonstration of their nuclear safety Instrumentation & Control (I&C) systems.

From the earliest design phases through to qualification before the French Nuclear Safety Authority (ASN), in accordance with the standards issued by sub-committee SC45a:

IEC 61513 IEC 61226 IEC 62671 IEC 60880 IEC 60987 IEC 62138 IEC 60780

This expertise draws on a combined command of both technical and regulatory matters, which is indispensable when supporting the most demanding nuclear programmes. We intervene at every stage of the safety I&C system lifecycle, drawing on a thorough understanding of international normative baselines and of the expectations of the Nuclear Safety Authority. This approach allows us to support architect-integrators and operators of Basic Nuclear Installations (BNIs) as well as system and component suppliers, providing tailored assistance at every level of responsibility and complexity, from initial design through to the final qualification of safety systems.

Support to architects and BNI operators

  • Classification of nuclear safety functions (Category A, B or C) in accordance with IEC 61226
  • Preparation of the baseline of requirements to be qualified (normative, environmental, functional and operational)
  • Definition of overall architectures (IEC 61513)
  • Specification of requirements for the nuclear safety I&C system
  • Drafting of the Preliminary Safety Report (RPrS) for the control & command scope
  • Support for the qualification follow-up of safety systems
  • Coordination of safety and cybersecurity (IEC 62859)
  • Drafting of a cybersecurity programme (IEC 62645)
  • Support in responding to the ASN
  • Through-life support strategy (operational maintenance / MCO)

Support to system and component suppliers

  • Definition of the qualification strategy and drafting of the Qualification Plan
  • Drafting of the System Quality Assurance Plan
  • Requirements engineering and requirements traceability with REQTIFY or DOORS
  • Independent verifier for the safety lifecycle
  • Qualification of pre-existing equipment (COTS): Pre-developed software (IEC 62138) · Smart Devices / ANFL (IEC 62671) · HDL (IEC 62566) · Hardware (IEC 60987)
  • Analysis and definition of I&C architectures (IEC 60709 / IEC 62340)
  • Support for the qualification of application software (IEC 62138)
  • Support for the qualification of hardware (IEC 60987)
  • Support for the qualification of HDL components (IEC 62566 / IEC 62566-2)
  • Drafting of a cybersecurity programme (IEC 62645)
  • Environmental qualification (IEC 60780 / IEC 60980 / IEC 61000) and K1 / K2 / K3 in accordance with RCC-E
  • Structuring of the system qualification dossier
  • Impact and non-regression analysis
  • Lifecycle and safety of the nuclear control & command system (IEC 61513)
· IEC 61513

Lifecycle and safety of the nuclear control & command system

A representation of the key stages covered by IEC 61513, from requirements specification through to modification of the system in service, featuring two parallel routes for the integration of pre-existing equipment and for the development of new software and hardware.

Flow diagram of the safety lifecycle in accordance with IEC 61513: specification of system requirements, selection of pre-existing equipment or families, adequacy analysis, system specification, then detailed design and implementation split into three routes (development of the application software with functional validation on a side branch, procurement of software and hardware equipment, development of new system software and hardware components), followed by integration, validation, installation and modification of the system
Source: schematic representation of the lifecycle described by the international standard IEC 61513 (instrumentation and control important to safety for nuclear power plants).
· Our expertise

Six focus areas structure our nuclear support

From component selection through to the qualification of complete systems, taking in risk studies and requirements traceability along the way.

Our training course for the nuclear sector

ISO Ingénierie has developed a 2.5-day training course on the topic "The IEC 61513 standard and the qualification approach". This course has been delivered to numerous stakeholders of the nuclear sector in France.

The aim is to provide participants with the knowledge and methods required to establish the prescriptions applicable to Instrumentation & Control (I&C) systems and equipment used to perform functions important to the safety of nuclear power plants, whether classified in Category A, B or C.

View the nuclear training courses
· They have placed their trust in us

Our references in the nuclear sector

A selection of representative assignments delivered over the past 20 years, organised into two principal areas of expertise.

Qualification of nuclear safety systems in accordance with IEC 61513

2H Energy
  • Support for the delivery of a complete lifecycle in accordance with IEC 61513 for the UK EPR programme
  • Deployment of the REQTIFY software and of the associated methodology for requirements traceability
ALSTOM
  • Analysis of the safety-classified control & command architecture of the Turbine for the UK EPR
CEA Cadarache
  • Client-side support for the follow-up of the nuclear safety-classified control & command of the experimental devices of the RJH
DCNS
  • Assessment of the control & command architecture for the FlexBlue subsea nuclear reactor programme
EDF SEPTEN
  • Definition of architectures for future nuclear power plants, in accordance with IEC 61513, RCC-E, WENRA and other standards
EDF DIPDE
  • Development of the qualification strategy for the safety control & command of a nuclear power plant, covering Class 1, 2 and 3 systems
EDF R&D
  • Analysis of a functional through-life support approach for control & command systems
  • Analysis of the impact of digital technologies on the fleet-level dimension of nuclear units
EURIWARE
  • Conformity audit of the applicative scope of a Category B nuclear function
FRIOTHERM
  • Qualification of the Class 2 application scope for nuclear chilled-water units
ILL
  • Definition and IEC 61508 / IEC 61513 compliance activities for a detritiation unit of a neutron production reactor
ITER
  • Preliminary design of the safety and nuclear-safety control & command architectures
ITER
  • RAMI studies with reliability and availability assessment for the diagnostic systems of the installation
  • Failure Mode, Effects and Criticality Analysis (FMECA)
  • Modelling of the systems using Reliability Block Diagrams and reliability calculations by means of Fault Trees
OMEGA Consortium
  • Technical review of documents for the safety-classified control & command of the ITER programme
  • Deployment of the REQTIFY software and of the associated methodology for requirements traceability
Réel
  • Support for the delivery of a complete lifecycle in accordance with IEC 61513 for the UK EPR programme
  • Deployment of the REQTIFY software and of the associated methodology for requirements traceability
TÜV SÜD
  • Technical review of documents for the safety-classified control & command of the CIGÉO programme, covering the whole documentary corpus (functional analysis, component selection notes) across the safety-classified control & command scope

Functional and environmental qualification of components

AREVA NP
  • Preliminary audit in accordance with IEC 62671 for the qualification of a nuclear safety-classified measurement system
Ariane Group
  • COTS selection strategy for the Cask Transport System under the ITER programme, in accordance with IEC 61513 and IEC 62671
  • Identification of environmental constraints for the qualification of COTS in accordance with IEC 60780 and setting up of a Requirements Traceability Matrix
CEA
  • Preparation and performance of an audit for the C1 qualification (IEC 60880 and IEC 60987) of a programmable logic controller intended to perform the Category A functions of the experimental devices of the RJH
Friotherm
  • K3 qualification of a control & command cabinet for a nuclear chilled-water unit function (DEL BIS), in accordance with RCC-E and CRT80.C.0.12
HIMA
  • Qualification of the HIMAX controller as Class 2 in accordance with IEC 61513
ITER
  • Definition of environmental constraints for electromagnetic compatibility (EMC)
ITER
  • Preliminary safety analysis of the selected equipment (HIMA Planar 4 and Siemens S7-F) intended to perform Category A and B functions
OMEGA Consortium
  • Support to the teams for the audit strategy for the qualification of ANFL in accordance with IEC 62671
ONET Technologies
  • Conformity audit of an ultrasonic measurement system in accordance with IEC 62671
ONET Technologies
  • C1 / K3 qualification of a software-free overspeed sensor (RCC-E)
Schneider
  • K3 / C3 qualification strategy for the M340 controller in accordance with IEC 61513 and RCC-E
SIEMENS
  • Audit in Zug (Switzerland) for the ANFL qualification of a fire detection system in accordance with IEC 62671
SNEF
  • Assessment of the software qualification of the Fire Safety System (SDI and CMSI) as Class 3 in accordance with IEC 61513 for the RJH programme, lot E01
  • Support to the teams for the audit strategy for the qualification of ANFL in accordance with IEC 62671

Ready to grow your team's expertise?

Contact our team for a tailored quotation or to register for our 2026 training sessions.