ISO Ingénierie
Focus area · Nuclear control & command

Nuclear risk analysis

Early phases · HAZOP & FMECA · Defence in depth · IEC 61226

Talk to an expert

Nuclear risk management is decided upstream of the project - not after. ISO Ingénierie transposes the HAZOP and FMECA methods to the nuclear context, facilitates the multidisciplinary working groups, builds defence in depth into the design choices, formalises the control & command doctrines and supports the IEC 61226 classification (categories A / B / C) of safety functions.

On a nuclear project, risk management cannot be caught up downstream. A failure scenario not identified during design costs a full architecture revision, a schedule slip and a rework of the safety case. That is why risk analysis methods - HAZOP, FMECA, fault trees - must be transposed to the nuclear context and applied from the earliest phases.

ISO Ingénierie supports EDF, Andra, CEA, SNEF, Valiance, Exail on these critical early phases: application of the methods, facilitation of multidisciplinary working groups, integration of defence in depth, drafting of control & command doctrines and IEC 61226 classification of safety instrumented functions.

Defence in depth - the 5 levels

A fundamental pillar of nuclear safety: several independent lines of defence protect the installation, from normal operation through to crisis management.

N1

Prevention

Prevention of operating anomalies and system failures.

N2

Detection & control

Surveillance and control of anomalies to prevent them from escalating into accidents.

N3

Accident control (design basis)

Control of accidents within the design basis thanks to dedicated safety systems.

N4

Severe accident management

Limitation of the consequences of severe accidents, including beyond the design basis.

N5

Crisis management

Management of the radiological consequences of a significant release and post-accident actions.

Reference baseline: INSAG-10 (Defence in Depth in Nuclear Safety, IAEA) and principles carried over into IEC 61513.

Your needs

What a nuclear project owner expects from the early-phase risk analyses.

01

Apply recognised and rigorous risk analysis methods, tailored to the specifics of the nuclear context, in order to identify as early as possible the failure scenarios liable to affect the safety of your installation.

02

Benefit from efficient facilitation of the multidisciplinary working groups involved, to capitalise on each contributor's expertise and converge on shared, actionable conclusions.

03

Build in from the design stage the principle of defence in depth, a fundamental pillar of nuclear safety, to ensure several independent lines of defence against accident scenarios.

04

Have clear and consistent doctrines for nuclear safety control & command, to harmonise the technical and organisational choices across the entire project.

05

Be supported in defining the nuclear safety instrumented functions and in the IEC 61226 classification of the associated systems, a structuring step that drives all subsequent safety requirements.

Our method

5 complementary activities, mobilised from the earliest phases of a nuclear project.

  1. 01

    Application of the HAZOP and FMECA methods

    Adaptation and transposition to the specific nuclear context in order to identify potential risks and their consequences in a comprehensive manner.

  2. 02

    Facilitation of multidisciplinary working groups

    Bringing together technical experts, business representatives and stakeholders to carry out the analyses in a collaborative and structured way.

  3. 03

    Integration of the defence in depth principle

    Deployment of successive and independent barriers to prevent, detect and limit the consequences of the postulated events.

  4. 04

    Drafting of doctrines for control & command

    Setting out common technical and methodological rules, applicable throughout the project and ensuring its overall consistency.

  5. 05

    Definition of instrumented functions and IEC 61226 classification

    Support in identifying and categorising (A / B / C) the safety functions, in order to determine the level of requirement applicable to each I&C component.

Our strengths

  • In-depth command of the risk analysis methods (HAZOP, FMECA) and of their adaptation to the specific requirements of the nuclear sector.
  • Proven experience in facilitating technical working groups, fostering the emergence of well-argued and actionable consensus.
  • Solid knowledge of nuclear safety principles, in particular defence in depth, making it possible to integrate these requirements from the earliest phases of a project.
  • Ability to formalise consistent technical doctrines, facilitating decision-making and the harmonisation of practices across the whole lifecycle.

Our offer

We support our clients from the earliest phases of their projects, implementing the risk analysis methods adapted to the nuclear context, facilitating the associated working groups, integrating the principles of defence in depth, drafting the nuclear safety control & command doctrines, and supporting the definition of the safety instrumented functions as well as the IEC 61226 classification of the systems concerned.

Our references

SNEF

Nuclear HAZOP on the chromatograph for the REN/RES system of the EPR HPC (Hinkley Point C) project

EDF

Nuclear risk analysis of gas storage as part of the fire risk management project of the Decennial outage VD4

Andra

Drafting of the nuclear safety control & command doctrine for the Cigéo project

Valiance

Drafting of the nuclear safety control & command doctrine for the Eden project (CEA Marcoule) and independence analysis of the defence in depth lines

Exail

Definition of system functions and classes in application of IEC 61226 for a variable-speed drive project

Train in the approach

Training course "The IEC 61513 standard and the qualification approach"

A 2.5-day training course to master the requirements applicable to safety I&C systems, including risk analysis and the classification of functions.

View the nuclear training courses
- To go further

Resources and related topics

Ready to grow your team's expertise?

Contact our team for a tailored quotation or to register for our 2026 training sessions.