ISO Ingénierie
Area · Nuclear control & command

Smart Devices qualification

Smart sensors · ANFL · Supplier audit · REA · IEC 62671 · RCC-E

Talk to an expert

Integrating a Smart Device (smart sensor, ANFL) into a safety-classified nuclear system means demonstrating its reliability - both software and hardware - before any installation. ISO Ingénierie carries out the independent analysis of the device, audits the supplier on site with access to confidential documents, proposes compensatory measures whenever discrepancies arise, and delivers the Evaluation and Acceptance Report (REA) compliant with IEC 62671 or RCC-E - defensible before the safety authorities.

Smart sensors and other connected devices - known as Smart Devices, or ANFL (Limited-Functionality Digital Devices) in EDF terminology - are transforming the operation of industrial installations. But in a safety-classified nuclear environment, this embedded intelligence raises one unavoidable requirement: demonstrating its reliability and regulatory compliance before any integration.

At ISO Ingénierie, our mission is clear: perform a comprehensive analysis of the Smart Device to ensure that it meets the requirements for use in a safety-classified nuclear system. Our position is independent - we investigate what product datasheets never reveal. Our references: EDF / EDVANCE (EPR UK - HPC), ILL (experimental reactor) and SIEMENS (RJH - SDI / CMSI).

Three interlocking baselines

A cross-reading of the baselines that govern the qualification of Smart Devices in the nuclear sector.

IEC 62671

Smart Devices

Framework standard for the qualification of pre-existing digital devices for nuclear I&C.

RCC-E

EDF baseline

French alternative for the qualification of electrical equipment, including Smart Devices.

IEC 61508

Functional safety

Functional safety basis applicable to safety-critical Smart Devices.

Your needs

What an architect, an operator or a BNI supplier expects from their Smart Devices qualification partner.

01

Integrate a smart sensor or a connected piece of equipment into a nuclear installation, in full regulatory compliance.

02

Obtain an independent and rigorous assessment of the risks associated with the embedded software and hardware.

03

Secure your technological choices when dealing with suppliers whose quality processes are not always transparent.

04

Produce defensible documentation (REA) that justifies your decisions to the safety authorities and internal stakeholders.

05

Reduce project lead times and risks by anticipating non-conformities before on-site installation.

Our activities

5 complementary activities, from the initial diagnostic through to the Evaluation and Acceptance Report.

  1. 01

    Analysis of the Smart Device's technical characteristics

    Evaluation of the embedded software and hardware - robustness, traceability and technological maturity.

  2. 02

    Analysis of the supplier's quality process

    Review of the development and validation methodologies applied during the design phase.

  3. 03

    Audit at the supplier's premises

    Detailed consultation of confidential documents - specifications, test plans, failure history - to shed light on grey areas invisible on a product datasheet.

  4. 04

    Implementation of compensatory measures

    Definition of concrete actions whenever discrepancies are identified, in order to guarantee an equivalent level of safety without blocking the project.

  5. 05

    Drafting of the Evaluation and Acceptance Report (REA)

    Reference document compliant with the IEC 62671 standard or RCC-E, serving as the decision-making basis for the device's acceptance.

Our strengths

  • A twofold technical and regulatory expertise, essential for engaging effectively with engineering teams, suppliers and safety authorities alike.
  • A structured methodology aligned with the nuclear baselines (IEC 62671, RCC-E), guaranteeing the admissibility of our deliverables.
  • A field audit capability, with access to and analysis of confidential supplier documents - for an evaluation that goes beyond commercial literature.
  • A pragmatic approach to compliance: we don't just identify discrepancies, we propose operational compensatory measures.

Our offer

ISO Ingénierie supports you end to end in the qualification of your Smart Devices, following a 5-step project cycle:

  1. 1
    Initial diagnostic

    Scoping of the device and of its integration context within the classified system.

  2. 2
    Technical and quality audit

    On the supplier's site if necessary, with access to confidential documents.

  3. 3
    Compensatory measures

    Definition of corrective actions in the event of discrepancies identified during the audit.

  4. 4
    Delivery of the REA

    Evaluation and Acceptance Report compliant with IEC 62671 / RCC-E, ready for the safety authorities.

  5. 5
    Deployment support

    Securing the final integration of the Smart Device into your classified system.

Our references

EDF / EDVANCE

5-year framework contract for the functional qualification of around one hundred Smart Devices (Limited-Functionality Digital Devices - ANFL) for the EPR UK - HPC programme.

ILL

5-year framework contract for the functional qualification of Smart Devices for the ILL experimental reactor, in accordance with IEC 62671 and IEC 61508.

SIEMENS

Qualification of the Smart Devices of the Fire Safety System (SDI and CMSI) as Class 3 for the RJH experimental reactor.

Train in the approach

Training course "IEC 63413 standard and qualification approach"

A 2.5-day course to master the requirements applicable to nuclear safety I&C systems, including the qualification of pre-existing devices (COTS and Smart Devices).

View the nuclear training courses
- To go further

Resources and related topics

Ready to grow your team's expertise?

Contact our team for a tailored quotation or to register for our 2026 training sessions.