ISO Ingénierie
Focus area · Nuclear control & command

Functional qualification

Safety lifecycle · Classes C1 / C2 / C3 · IEC 61513 · 62138 · 62645

Talk to an expert

Functionally qualifying a nuclear safety-classified I&C system requires supporting the entire IEC 61513 lifecycle - not only the final phases. ISO Ingénierie drafts the qualification and development plans, tracks requirements in Reqtify, analyses the architectures (redundancy, single failure), supports the application software qualification (IEC 62138), carries out the cybersecurity risk analysis (IEC 62645) and defines the through-life support (MCO) strategy.

For a supplier of nuclear safety-classified I&C systems, functional qualification is not something that is settled at the end of the project. It is prepared from design, steered throughout development, and continues into through-life support (operational maintenance / MCO). IEC 61513 imposes a complete safety lifecycle in which every requirement must be traced, every architecture justified, every application software documented against IEC 62138, and every cybersecurity risk analysed in accordance with IEC 62645.

For over 20 years, ISO Ingénierie has been supporting the suppliers that take this journey - from the drafting of the qualification plan through to the MCO strategy, including Reqtify tracking and architecture analysis. Our references: CEA (RJH), EDF (EPR2), ITER (CSS), Andra (CIGEO), Friotherm, Réel, 2H Energy.

Three interlocking standards

A cross-reading of the standards that structure the functional qualification of nuclear I&C systems.

IEC 61513

Nuclear safety instrumentation and control

Framework standard for the safety lifecycle

IEC 62138

Application software

Software development and qualification

IEC 60987

Hardware

Hardware development and qualification

Your needs

What a supplier of nuclear safety-classified I&C systems expects from its qualification partner.

01

Benefit from structured support throughout the entire safety lifecycle of your system, from the design phases through to through-life support.

02

Formalise a qualification strategy compliant with the requirements of IEC 61513, applicable to the instrumentation and control of nuclear installations.

03

Guarantee the traceability of all project requirements, in order to secure conformity reviews and facilitate exchanges with your stakeholders.

04

Ensure that your I&C architecture complies with the expected safety principles, in particular regarding redundancy and the management of the single failure criterion.

05

Benefit from support in the qualification of your application software, in accordance with the requirements of IEC 62138.

06

Benefit from support in the qualification of your hardware, in accordance with the requirements of IEC 60987.

07

Integrate a rigorous cybersecurity risk analysis, in line with IEC 62645.

08

Structure a comprehensive qualification dossier, usable during validation and safety review bodies.

09

Anticipate long-term maintenance challenges by defining a through-life support (operational maintenance / MCO) strategy suited to your system.

Our method

8 complementary activities, covering the entire safety lifecycle in accordance with IEC 61513.

  1. 01

    Drafting of the system qualification plan

    Formalisation of the qualification strategy in accordance with the requirements of IEC 61513.

  2. 02

    Drafting of the quality assurance plan

    Guarantee of process control throughout the project, from design through to commissioning.

  3. 03

    Requirements tracking in Reqtify

    Reliable, operable traceability at every stage, from the initial need through to final verification.

  4. 04

    I&C architecture analysis

    In-depth study of redundancy, single failure criterion and expected safety principles.

  5. 05

    Support for the qualification of the application software

    Support in accordance with IEC 62138 for the software safety demonstration.

  6. 06

    Cybersecurity risk analysis

    Study carried out in accordance with the principles of IEC 62645, consistent with safety requirements.

  7. 07

    Structuring of the qualification dossier

    Organisation of the documentary corpus to facilitate its examination, review and validation.

  8. 08

    Development of the through-life support (MCO) strategy

    Definition of a through-life support (operational maintenance / MCO) strategy for the long-term durability and availability of the system.

Our strengths

  • Expertise covering the entire safety lifecycle, from design through to operational maintenance.
  • Combined command of the applicable normative baselines (IEC 61513, IEC 62138, IEC 62645) for a consistent, cross-cutting approach to qualification.
  • Capacity for in-depth technical analysis of I&C architectures, incorporating the most demanding safety requirements.
  • Proven requirements-traceability methodology, supported by the Reqtify tool.

Our offer

To support you effectively in the qualification of your I&C systems, we provide an integrated service covering the drafting of qualification and development plans, requirements tracking in Reqtify, architecture and cybersecurity analysis, support for software qualification, structuring of the qualification dossier, and the development of your through-life support (MCO) strategy.

Our references

CEA

5-year client-side support assignment for the follow-up of the safety-classified (C1, C2 & C3) nuclear I&C in accordance with IEC 61513 for the experimental devices of the RJH programme

EDF

Definition of I&C architectures for future nuclear power plants as part of the EPR2 programme, in accordance with IEC 61513, RCC-E and other standards

ITER

Preliminary design of the nuclear safety I&C architectures of the Control Safety System (CSS) for the ITER programme

Andra

5-year technical review and regulatory support assignment for all the I&C systems of the nuclear waste disposal programme, APS / APD phases

Friotherm

Qualification of the Class 2 I&C for nuclear chilled-water units in accordance with IEC 61513

Réel

Qualification of the Class 1, 2 and 3 I&C of the auxiliary crane of the UK EPR, in accordance with IEC 61513

2H Energy

Qualification of the Class 1 I&C of the Emergency Diesel Generators (EDG) of the UK EPR, in accordance with IEC 61513

Train in the approach

"IEC 61513 standard and qualification approach" training course

A 2.5-day training course to master the requirements applicable to safety I&C systems, including functional qualification throughout the entire lifecycle.

View the nuclear training courses
- To go further

Resources and related topics

Ready to grow your team's expertise?

Contact our team for a tailored quotation or to register for our 2026 training sessions.